Gypsum Plaster

Approx. Rs 295 / BagGet Latest Price

Product Details:

• Vermiculite Base N-1
• Single Substitite to Cement and Finishing Plaster 
• An ISO 9001:2008 and 14001:2004 Certified Company 
• Manufactured By : Jai Durga Plaster Industries 

Approx. Rs 325 / BagGet Latest Price

Product Details:

Approx. Rs 290 / BagGet Latest Price

Product Details:

Approx. Rs 248 / BagGet Latest Price

Product BrochureProduct Details:

Gyproc Elite-90 is a one coat gypsum plaster for use on almost all backgrounds, e.g. brickwork, block work or concrete. It provides a smooth, inert, high quality surface to internal walls and ceilings and a durable base for application of decorative finishes. It is a lightweight, retarded hemihydrate, premixed gypsum plaster, incorporating expanded perlite aggregate, requiring only the addition of clean water to prepare it for use.

Features
• Eliminates two-step process of Sand Cement Plaster and POP punning 
• Doesn’t require water curing 
• No shrinkage cracks  
• Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure.  
• Use of light weight aggregates in the plaster mix help to improve the Thermal resistance. (Thermal Resistance R = 0.07m²K/W at 13mm thickness) 
• GRIHA and Greenpro Certified


Chemical Composition

• Calcium Sulphate Hemihydrate

Drying Type

• Setting

Identification & Packing

• Elite-90 is packed in HDPE bags. The outer layer of the bag is printed with the product image, safety instruction, batch number, date of manufacturing, UOM, correspondence address and application instructions.

Approx. Rs 2,560 / PieceGet Latest Price

Product BrochureProduct Details:

It is a bonding agent for Gypsum plaster & Sand cement plaster that enables preparation of Ceiling and wall surfaces (especially RCC surfaces) within 24 hours. Gyproc Bond-it eliminates risk of debonding gypsum plaster or sand cement plaster from ceiling (RCC surface) due to its low suction background and continuously under pressure of gravity. It enables dual benefits of mechanical and chemical bonding, and completely eliminates the labour intensive hacking process and the risk of plaster de-bonding.

• Gyproc Bond-it increases pull out strength by 5 times against conventional hacking process. New technology like aluminium formwork shuttering needs products like Gyproc Bond-it to provide adhesion of Gypsum plastering.

Features and Benefits

• Dual Bonding Chemical and Mechanical Key
• Single Coat brush application
• No Tackiness required
• Green Colour

Benefits

• 2X more strength
• 10X faster Application
• Easy Supervision

Approx. Rs 210 / BagGet Latest Price

Product BrochureProduct Details:

Gyproc Xpert Stucco Gypsum Plaster is a stucco gypsum plaster made for application on almost all backgrounds, e.g. brickwork, block work or concrete, suitable for application like POP punning (over Sand & Cement Plaster), bull marks, level strips, etc. It has special additives for enhanced setting time helps in controlling the onsite wastages. It provides perfectly lined and leveled surface providing a perfectly flat surface ready for painting.

Features

• Extra whiteness
• Natural Gypsum genuinely Better.
• Doesn’t require water curing
• No shrinkage cracks
• Non-combustible (when tested in accordance with BS: 476: part 4:1970), therefore a good form of thermal protection to the building structure.
• With improved Thermal resistance properties. (Thermal Resistance R = 0.07m²K/W at 13mm thickness)
• GRIHA and Greenpro Certified.

Approx. Rs 210 / BagGet Latest Price

Product BrochureProduct Details:

Xpert Plus Stucco Gypsum Plaster is a stucco gypsum suitable for application like POP punning (over Sand & Cement Plaster), bull marks, level strips, etc. Its enhanced setting (10 – 12 minutes) helps in controlling the on-site wastage of the product as compared to local POP with setting time of 5-6 minutes.

>> Natural Gypsum genuinely Better.

Approx. Rs 625 / BagGet Latest Price

Product Details:

Pro-Fill Jointing Compound

Polymer based powdered jointing product

Product Features

• Air Drying – Drying Time Depends On Temperature & Humidity
• Minimum Or No Shrinkage
• Excellent Workability
• Excellent Bond Strength And Higher Crack Resistance
• Zero/ Minimum Wastage

Application

• Gyproc Pro-Fill is an Air-Drying jointing compound used for plasterboard finishing at vertical & horizontal joints. It is also used for filling the uneven gaps, small cut-outs and finishing of the internal and external corner joints.

Weight: 10 Kg & 25 Kg Bag.
Water to Powder Ratio 1:2

Process of Jointing & Finishing

First Coat

• Using an applicator / Trowel, fill the recess formed by the edges of the sheets with Gyproc Pro-Fill.
• Centre the paper tape along the joint and using a Taping knife / Trowel press the tape down into the Pro-Fill ensuring no air bubble remain behind the tape.
• Immediately apply a thin coat of Pro-Fill over the surface of the tape (100-150 mm wide).
• Allow it to dry

Second Coat

• Apply a second coat of Gyproc Pro-Fill with an Applicator / Trowel.
• Ensure that this coat extends outside the area of the first coat (200-250 mm wide).
• Allow to thoroughly dry and scrape back any build-up of compound along the joint

Third Coat

• Apply a finishing coat of Gyproc Pro-Fill with an Applicator / Trowel.
• Joint edges should be feathered at least 50 mm beyond the edges of the previous coat
• Allow to dry. Lightly sand in the same direction as the joint using finer sandpaper.